Misfit 180/Nighthawk Pro Dual Mounting Point HS1177 Camera Mount
Description
Edit: A Fully Adjustable Camera Mount Has Now Been Uploaded Too. You Can Run Any Camera Angle Now. I Remixed Syco'S Hs1177 25 Degree Camera Mount To Fit A Pats Minih Quad Misfit 180 And Also A Nighthawk Pro (Remove The Original Camera Plate And Screw Down Using The Hole And Slot In The Front Of The Bottom Plate) There Are Two Mounting Holes In The Bottom Plate To Allow For Different Camera Positions. Originally I Wanted Something That Would Stop The Camera From Rotating In An Impact. (25 Degrees Wedge) But Upon Testing, Using 1.5Mm Hex Bolts Into The Hs1177 Proved Sturdy Enough To Stop The Camera Moving. So I Added A Lug On And A Second Hole To Syco'S Design. (6Mm Distance From Both Hole Centres)
Statistics
Likes
3
Downloads
0