Gear extractor / puller for NEMA motors
Description
This Is A Tool That Makes You Able To Extract The Pulleys / Gears That Come Attached To The Nema Motors From Factory (Old Printers, Scanners, Office Copy Machines, Etc) Against Itself, Without Damaging The Motor Inners. I Choosed M4 Screw Due The Nema Shaft Diameter (5Mm). Important: Print This Piece At 3 Shells And 30% Infill, And Do Not Rotate Or It Won'T Come Up Strong Enough To Withstand The Needed Strength.
Statistics
Likes
81
Downloads
0