Modified RepRapPro Fisher Delta Carriage
Description
Modified Carriage Design From The Source. This New Version Uses Captive Locking Nuts Inside The Part As Well As On The Outside In Addition There Are 2X M3 Threaded Rods, 20Mm Long, That Are Screwed Into The Part Through The Nuts. You Can See From The Picture How The Hardware Is Assembled Into The Part. Adjustment Is Made Using The Threaded Rod And The Outside Locknut, For More Detail Please See Http://Www.Thingiverse.Com/Thing:1034390. The Improvement In This Modification Comes By Having The Locknut In The Middle Of The Part Ensuring That The Balls Cannot Come Loose Through Vibration. Remember To Apply Threadloc To The Steel Balls Once Assembled. Parts List (Per Carriage): 2X M3X20 Threaded Rod (Or Grub Screw), With Hex Socket In The End 4X M3 Nyloc Nuts 2X M3 Washers 2X 6Mm Diameter Balls Drilled With M3 Threads
Statistics
Likes
8
Downloads
0