limited slip reel holder for the ultimaker 2 50mm reels
Description
This Is My Own Design For A Reel Holder For The Ultimaker 2. It Has 3 Spring-Loaded Chucks That Hold The Reel Firmly In Place And A Limited Slip Function That Enables The Holder To Rotate Smoothly But Prevents Unwanted Unwinding. I Have Designed This Reel Holder For Filament Spools With A 50Mm Centre Hole. As I Only Have A Ultimaker At Home I Haven'T Been Able To Design More Attachment Plates For Other Printers But The Parts Are Modular And Easy To Customize To Fit Onto Other Printers. Please Send Me Some Measurements For Your Printer And I Will Add The Design To The Library. All The Plastic Parts Are Printed In Pla On My Ultimaker 2 With A Brim At 0.15Mm Layer Height, 1.2Mm Wall Thickness, 50Mm Per Second Printspeed And 50% Infill. Everything Can Be Printed As Is Except For The Attachment Plate Witch Needs Al Little Support Under The Lip. To Complete This Project Besides The Printed Parts You Will Also Need: 2X 10Mm Of 2Mm Welding Rod 6 Pen Springs 1 Spring From A Lighter ( Bic Or Any Other Flint Operated Lighter ) 1 Countersunk Screw 3.5X30 Axle Attachment 4 Countersunk Screws 3X10 Attachment Plate/Backplate 3 Countersunk Screws 3.5X25 Outer Body/Inner Body 3 Pieces Of Binding Wire +- 0.5 Mm In Diameter And Roughly 10 Cm Long. As For Tools You Will Need: A Screwdriver ( Matching Your Screws) Drill Bit 2 Mm Tough Pliers To Cut The Welding Rod And Binding Wire A Hobby Knife Some Sandpaper Or File To Smooth Out The Parts Where Necessary Axle Grease If You Have Any Questions Please Let Me Know.
Statistics
Likes
20
Downloads
0