Sweet stackable XT60 panel and plug mounts
Description
I Needed Some Plugs For A Panel Box And Rather Than Bulky Plugs, I Used Xt60 Connectors From My R/C Toys. You Can Place The Xt60 Male Or Female End As Needed. I Made Flat Panel Mounts And Plug Housings That Can Stack As Well. This Makes A Solid-Feeling Plug Setup. You Will Need: Plug Mount- 2 M3X10Mm Bolts (I Used Socket Heads. It'S What I Had.) And 2 M3 Locknuts Panel Mount Holder- 2 M3X10Mm Bolts And 2 M3 Locknuts To Hold The Xt60 Panel Mount Backing- 2 M3X10Mm + Your Bulkhead Thickness (Ex. 10Mm+3Mm Bulkhead =~15Mm Bolt) Bolts And 2 M3 Locknuts If You Are Stacking Them, Allow 10Mm For Each Housing; 3 Stacked Fittings= 30Mm Bolt There Are Two Plug Mount Files. One Has Arrows Pointing In And One Has Arrows Pointing Out. This Can Be A Reminder Of Power In Or Signal Out, Etc. Have Fun!
Statistics
Likes
98
Downloads
0