E3D v6 Bowden extruder for Wanhao Duplicator i3
Description
E3D V6 Bowden Extruder For Wanhao I3 =============================== This Include Holders Of Step Motor To Top Frame, X-Carrage Block For E3D And More. --------------------- ### Need To Buy - E3D V6 (J-Head) Hotend For 1.75Mm (Include Cooling Fan, Hotend Fitting) - Ptfe Tube For 1.75Mm (1 Meter) With Cold End Fitting (I Use 0.5M Only) - Kit Of Nozzle For E3D V6 (Line Is Very Wide, From 0.2 To 1.0Mm) - Fasteners (M3 And M4 Nuts, Screws Of Different Lengths) --------------------- ### Mounting Of The Stepper Motor It Is Possible To Mount Of Stepper Motor On The Top Of Printer'S Frame Only. May Be I Design A Mount For Another Places. **Holder V1.0 Include** - Step_Motor_Holder_Frame_V.1.0_Nut.Stl - 2Pcs - Step_Motor_Holder_Frame_V.1.0_Rest.Stl - 1Pcs - Step_Motor_Clamp_V1.0.Stl - 1Pcs - M4 Nuts - 2Pcs - Short M4 Screws (9-10Mm) - 2Pcs **Holder V1.1 Include** (More Difficult To Print Than V.1.0) - Step_Motor_Holder_Frame_V.1.1.Stl -1Pcs - M4 Nuts - 2Pcs - Short M4 Screws (9-10Mm) - 2Pcs --------------------- ### Cold End I Use: - Stock Parts Of Mk10 - [Kharar'S Mk9 Bowden Extruder](Http://Www.Thingiverse.Com/Thing:784247) - [Mk9_Bowden.Stl](Http://Www.Thingiverse.Com/Download:1372512) - M3 Screws 20Mm - 2Pcs --------------------- ### Extruder E3D V6 Mount X-Axis Belt Holder Is Mount **On Bearing Block**: - E3D_Hotend_Base_V1.0.Stl (Need Add Support In Nut'S Holes) Or E3D_Hotend_Base_V1.0_Wsupp.Stl - 1Pcs (Infill 50-60%) - E3D_Hotend_Clamp_V1.0.Stl - 1Pcs (Infill 50-60%) - X-Axis_Endstop_Holder.Stl - 1Pcs - M4 Nuts - 2Pcs - M4 Screws (40Mm Or More) - 2Pcs - M3 Screws (7-8Mm) For X-Endstop Holder - 2Pcs - Stock M3 Screws For Mount Cable Chain - 2Pcs - Stock M2 Screws For Mount X-Endstop - 2Pcs X-Axis Belt Holder Is Mount **On Screws** In Back Side: - E3D_Hotend_Base_V1.0.Stl (Need Add Support In Nut'S Holes) Or E3D_Hotend_Base_V1.0_Wsupp.Stl - 1Pcs (Infill 50-60%) - E3D_Hotend_Clamp_V1.0.Stl - 1Pcs (Infill 50-60%) - X-Axis_Endstop_Holder.Stl - 1Pcs - M4 Nuts - 4Pcs - M4 Screws (40Mm, **Not More**) - 2Pcs - M4 Screws (20-25Mm) For Back Side - 2Pcs - M3 Screws (7-8Mm) For X-Endstop Holder - 2Pcs - Stock M3 Screws For Mount Cable Chain - 2Pcs - Stock M2 Screws For Mount X-Endstop - 2Pcs --------------------- ### What Else Need To Start? You Need Desicion Few Questions: - If You Install This Extruder, Than Change Height Of Nozzle. It Will Be Higher Than Stock Extruder. You Need Move The Z-Axis Endstop Below. Not More Z-Axis Adapter Can Move Down. I Desing [This Simple Adapter](Http://Www.Thingiverse.Com/Thing:1442521), You Can Use It. **Print This Before Installing Extruder!** - It Is Not Critical. In This Extruder Nozzle Misses On The Bed. You Can Make [Y-Axis Endstop Adapter](Http://Www.Thingiverse.Com/Thing:1468794) And Fix It. --------------------- ### Modifications You May Have Noticed A Lot Of Holes In Mount Extruder. This Is Done For Easy Mount Additions And Need M3 Screws (7-10Mm). You Can Make Wire_Clamp.Stl For Fixing Wires. --------------------- ### Cooling I Make The Adapter (Fan_Holder_For_Saldots_Design_V1.0.Stl) For [Saldot'S Desing Fan Holder](Http://Www.Thingiverse.Com/Thing:780379). One Adapter Include: - Fan_Holder_For_Saldots_Design_V1.0.Stl - 1Pcs - M3 Nut - 1Pcs - M3 Screw (20Mm) - 1Pcs - M3 Screws (7-10Mm) - 2Pcs And I Design Mount For Radial Fan 50Mm, It Is Very Efficient. But Printing Is Not Simple: You Should Be Able To Make Bridges. - Radial_Fan_50Mm_Mount_V1.0.Stl - 1Pcs - M3 Nut - 1Pcs - M3 Screws (20Mm) - 2Pcs - M3 Screws (7-10Mm) - 2Pcs - Radial Fan 5015 (Size 50X50X15Mm) - 1Pcs --------------------- ### Problems Maximum Printing Height Is Main Problem In This Realise. Height 160Mm Is Limit For Non-Problem Printing. If Extruder Lifted Higher Than 160Mm, Then Ptfe Tube Rubbing The Stepper Motor. In The Feature I Desing New Mount For Stepper Motor. This Will Increase The Height Of The Print. --------------------- Give Back "**I Made One**", Please. This Is Pleasant For Designers))
Statistics
Likes
235
Downloads
0