Prusa i3 magnetic bowden X-carriage for E3D v6
Description
<H1->Description</H1-> <P>This Is My Take On The Prusa I3 X-Carriage For A Bowden Extruder Setup. My Main Goal Is To Make An Easily Removable Hotend Mount To Allow The User To Easily Work On The Hotend, Which I Achieve Using Magnets! </P> There Are 2 Design Variations: <Ul> <Li>The "Stock" (1A) Flavour Allows You To Use "Whatever" Cooling You Would Like, And Gives You The Best Z-Axis Height.</Li> <Li>The "Diii Compatible" (1B) Will Allow You Use A Diiicooler For The Best Cooling Results, However, You Will Have To Compromise Your Z-Axis Height By About 15Mm.</Li> </Ul> <H1>Attributes</H1> <Ul> <Li>I Have Used <A Href="Http://Www.Thingiverse.Com/Thing:1036871">Toolsons X-Carriage</A> As My Base. He Has A Great Design For It. You Should Really Consider Checking Out His <A Href"Http://Www.Thingiverse.Com/Toolson/Designs">Designs</A> If You'Re Using A P3Steel.</Li> <Li>The <A Href="Http://Www.Thingiverse.Com/Thing:1025471">Diiicooler</A> By Pawpawpaw85 Is Probably The Best Cooler For Pla That I Have Personally Used (Your Mileage May Vary).</Li> <Li>Yakulis' <A Href="Https://Www.Thingiverse.Com/Thing:1104946">X-Axis Endstop Holder</A> Is Very Useful For The "Stock" Flavour, Although Any Endstop Holder With A Similar Design Should Work. </Li> <Li>Thanks To Neo_Usagi For His <A Href="Http://Www.Thingiverse.Com/Thing:433258">E3D V6</A> Model. </Li> </Ul>
Statistics
Likes
118
Downloads
0