Front derailleur adapter (braze on)

Description

This Is An Adapter To Mount A Braze-On Front Derailleur On A Mongoose Malus Fat Bike. The Mongoose Malus Comes With A Single Sprocket Front, I Wanted To Piece Together A Triple. This Bike Has A Bottom Bracket Size Around 112 Mm, So I Had To Offset The Deraileur And The Cable Stay As Well. There Are 4 Parts Here, Put Together Into 2 Assemblies, Each Assy Clamps Onto The Seat Tube Separately. The Cable Stay Has A Spacer To Keep It From Moving Up The Tube If The Cable Force Is Large. Printing This As 2 Assemblies Makes The Printing Much Simpler, And Allows You To Rotate The Cable Guide If You Need A Different Orientation. I Printed Mine In Pla At 40% Fill, Seems Strong Enough For My Wussy Riding, But I Suppose You Could Print With Nylon Or At A Higher Fill Density If You Need It To Be Stronger. Vitamins: 4 6Mm Bolts And Nuts 2 3Mm Steel Rods (20Mm Long) Or Bolts I Used This With A Shimano Sora Braze On Derailleur (Shimano Sora Fd-3500 Front Derailleur)

Statistics

Category

Tags