Gir From Invader Zim
Description
Please Watch This Video For More Information: Https://Youtu.Be/1Gy-Gs2Yxpi It'S Time For Another 3D Design, And This Week, We'Re Going Back A Decade And Making Gir From Invader Zim. I Included 2 Files, One Is Just The Gir Model, And The Other Is One With Tree Supports Added In Meshmixer. I Created This Model In Fusion 360. I Wanted Him To Print In A Single Piece, And I Tried To Position Him So He'D Need Minimal Supports. I Added Supports In Meshmixer Because I Wanted To Try Out The Tree Supports They Have. It Worked Alright, There Was Some Artifacting I Would'Ve Preferred To Avoid. I Printed It On My Robo 3D R1 With Hatchbox White Pla. Print Settings: Layer Height: 0.3Mm Infill: 20% Supports: Yes Raft: No Post Processing: Step 1: Sand/File Any Rough Spots. Step 2: Apply Plastic Primer. Give It A Few Coats, Letting It Dry Completely In Between. Step 3: Paint The Gray/Silver Areas. We Used Spray Paint, Krylon Hammered Metal. Apply A Few Coats Letting It Dry In Between. Step 4: Paint The Details. These Are The Teal Colored Eyes And Joints As Well As The Black On His Mouth. We Used Water Based Acrylic Paint With A Paint Brush.
Statistics
Likes
856
Downloads
0