ATmega328P HUB75 16x32 matrix display driver
Description
This Is Custom 5X5Cm Arduino Uno Board That Allows Simple Connection To Hub75 Interface Led Displays. If You Are Not Familiar With Such Displays You Can Buy One From Adafruit [16X32 Rgb Led Matrix Panel](Https://Www.Adafruit.Com/Products/420), Or From [Aliexpress](Http://Www.Aliexpress.Com/Snapshot/7410248317.Html) Hub75 Interface Led Displays Usually Comes With Flat Cable For Data And Power Cable. So After You Soldered This Pcb All You Need To Do Is To Connect Power Cable To Screw Terminal. And Plug Flat Cable To Pcb And Led Display. Pinout Compatible With Adafruit "Rgb Matrix Panel" Library, But I Wanted To Understand How Hub75 Interface Works. So I Wrote My Own Library. Five Free Pins Can Be Used To Connect Sensors Or Other Devices. See Examples Below. Gerber Files For Seeedstudio Fusion Pcb Service Attached. It Will Cost You 10$ To Produce 10 Of This Pcb. Also Eagle Schematic And Board Layout Files Attached.
Statistics
Likes
20
Downloads
0