Print-In-Z Printrbot Simple Metal Clips
Description
These Clips Are Used To Attach A Printinz Zebra Board To Printrbot Simple Metal. The Clips Recommended On Their Site Have The Possibility Of Falling Off While Printing. My Clips Are Bolted Down To Prevent Slipping Off During Printing. Installation: Print A Left And Right Block. Remove Any Excess Material / Flashings From The Part. Remove Screws Near Front Of The Simple Printing Bed, Install The Clip, And Then Reinstall The Removed Screws As Shown In The Photos. The Fusion360 Parts Are Attached If You Want To Modify Them Yourself.
Statistics
Likes
7
Downloads
0