Steering wheel knob
Description
This Is My Steering Wheel Knob (Or Brodie Knob) Project For Car (Or Boat) I Needed This To Increase My Capacity To Maneuver My City Car During The Parking, As I Had A Small Accident On My Left Hand. It Worked Very Well, Despite Its Simplicity. I Decided, In Fact, To Avoid Bearings (Not Really Necessary Due To The Limited Number Of Turns It Makes) Here The List Of The Metallic Parts: (All Sizes In Millimeters) 1 Bolts M8 (80 X 8) (Hexagonal Head) 3 Nuts M8 (6 Mm Thickness) 4 Washers M8 (Ext. Diam. 15 Mm.) 2 Bolts M3 (20 X 3) (Round Head) 2 Nuts M3 I Added Several Versions, Choose The Model Which Correspond Better To The Section Diameter Of Your Steering Wheel. Edit 27/04/16: Added A New Larger Knob, If You Need One (Better Grip, In Case You Have An Heavy Steering, Like On A Tractor). If You Choose To Realize This One You Should Also Replace The Main Bolt, Always A M8 But 100 Mm Length. The Jaws Remain The Same.
Statistics
Likes
852
Downloads
0