Yuneec Q500 External Camera Cable Mounting Bracket V2 with Quick-Release
Description
I Decided To Re-Design The Original Bracket That I Created To Mount The External Antenna Wire After The Cgo2 Has Been Modified With A 30 Cm Ufl To Rp-Sma Antenna Wire So It Can Be Quick-Released And Can Be Used With The Steady Grip. How To Install: 3D Print 2 Of The Stl Files Called "Yuneec Q500 External Camera Bracket V2 Drone Clip" One Should Be Epoxied To The Bottom Of Your Q500 And Also Has A Optional Pilot Hole To Add A Screw For An Additional Way To Secure The Bracket To Your Q500 And The Other One Should Be Attached The Same Way To Your Steady Grip. (See Pictures) 3D Print 1 Of The Stl Files Called "Yuneec Q500 External Camera Bracket V2 Antenna Clip" Screw A #6-32 1/2" Screw Thru The Smaller Hole It Should Be Able To Thread Into The Plastic. (See Pictures) This Part Will Be What The Rp-Sma Antenna Connector Will Attach To. (See Pictures) Additional Hardware Needed: 1 X 6-32 - 1/2" Machine Screw 1 X 6-32 - Wing Nut 1 X Tube Plastic Epoxy 2 X #8 1/2" Screws (Optional)
Statistics
Likes
7
Downloads
0