Eachine Racer 250 FPV Camera Mount-Replace V3, 20Degree, Holedistance 32mm
Description
Update 2016-05-11: Adjustmenthole For Cameralens-Adjustmentscrew Added. I Wanted To Replace My Fpv Camera On Er250, After The Original Cam Died. But The New One Has Many Smd Parts On The Frontside Of Camera-Pcb, So It Wasn'T Possible To Use The Orignal Carbon Mount.This Was The Reason, Why I Had To Design A Mount That Is Suitable For The New Camera. This Is A Version 2, Which Is More Tough, Than V1. Where To Buy: Http://Www.Banggood.Com/700Tvl-Fpv-Hd-Ultralight-Sony-Camera-With-2_1Mm-Lens-Ntscpla-For-Fpv-Rc-Multicopter-P-1000385.Html Description: Camera Mount Has A 20Degree Tilt Angle. You Will Need To Do A Modification On The Face Of Er250 To Make Some Clearance For The New Camera With This Tilt Angle (Original Tiltangle Can Go Up To 15 Degree). You Will Need Remove The Power-Connector, Cause Of Clearance Problems, If You Use This Camera. For Cameras With Holedistance About 32Mm.
Statistics
Likes
10
Downloads
0