BLTouch Home & Auto Levelling Height Gauge
Description
Bltouch Gauge Block Help Set The 8.3Mm Height From The Nozzle. I Believe The Newer Smart Bl Touch Has A 8.5Mm Distance, From Shoulder To Tip Of Probe. Also See: Bltouch Home & Auto Levelling Height Gauge [Custom Height] Https://Www.Thingiverse.Com/Thing:3632378 How To Use It:- See How I Used This Bl Touch Gauge, Should Link To This Position Of This Adjust This Video:- Https://Youtu.Be/Trujb5Tqmoa?T=5M8S See Bl Touch Getting Adjusted, Should Link To This Position Of This Adjust This Video:- Https://Youtu.Be/Trujb5Tqmoa?T=11M0S Bltouch Home & Autolevelling Classic (White Colour) Https://Www.Indiegogo.Com/Projects/Bltouch-Auto-Bed-Leveling-Sensor-For-3D-Printers#/ Bltouch Is An Auto Leveling Sensor For 3D Printers Based On Open-Source. It Could Work With Any Kinds Of Bed Materials, Such As Glasses, Woods, Metals, And So On. I Has:- Self-Test : The Push Pin Operates Itself Three Times To Test When The Power Is On. Alarm : The Led Light Blinks If A Problem Found On A Self-Test Or On An Operation. Bltouch Consists Of Atmel Attiny13A, Solenoid, And A Push Pin. High-Precision Type Sensor : Using Hall Effect ➡ Not Optical, Either Proximity(Inductive Or Capacitive) One. The Bltouch Needs To Be Set At 8.3Mm (+/-0.2) Above The Nozzle. I Believe The Newer Smart Bl Touch Has A 8.5Mm Distance, From Shoulder To Tip Of Probe. This Simple 3D Printable Gauge Should Help You Achieve This. Remember That This Bltouch Gauge Block Will Need To Be Set Onto A Sheet Of Paper, (The Distance Of The Nozzle Tip Above The Print Bed. I Do Not Own Or Have A Bltouch So I Have Not Been Able To Test This Bltouch Gauge Block In A Real World Situation. 20% Infill Is Ok With 4 Layers Top To Prevent Any Infill Bumps Passing Through To The Top Surface. A Light Sanding To Smooth The Top Could Help, But Keep Checking The Height Of The Bltouch Gauge Block.
Statistics
Likes
321
Downloads
0