Laser-Cradle for Fabscan Pi Cube
Description
This Is A Laser Cradle Fo The Opensource Scanner Project Fabscan Pi Cube. Depending On The Diameter Of The Used Laser Module There Are Three Versions (8Mm, 9Mm And 12Mm Diameter). This Thing Makes The Needed Adjustments Simple, Easy And Time Saving. The Base (Platform) Is The Same. A Clamp Is Used For Fixing The Laser Module. A Small Notch Can Be Used To Check The Exact Angle Of 33.1929 Degrees). I Decided To Use A M6 Screw As Rotation Axis - So A Nema 17 Motor Axis Should Fit Too.
Statistics
Likes
11
Downloads
0