Prusa Control Box, Tevo Tarantula, RepRapDiscount Smart Controller
Description
I Printed This At .2 Layer, .8 Bottom/Top/Sides. 20% Fill And 50 Print Speed Pla 220 Temp. The Amf File Is In Mm And Oriented The Right Way. The Stl File Is In Inches And Needs To Be Oriented With The Small Hole On The Bottom. Print Then Break Off The Support. This Worked With Mine But Seeing How Sloppy The Boards Are I Added A Little Extra Room On The Holes. The Photos Are Of The First Run, I Have Revised The Slot For The Sd Card Smaller For Easier Printing.
Statistics
Likes
82
Downloads
0