F-F-Fiddle
Description
Be Sure To Check Out My New Modular Fiddle! Thingiverse Page: Https://Www.Thingiverse.Com/Thing:3131400 The F-F-Fiddle (Pronounced Eff-Eff-Fiddle) Is A Full Size Electric Violin That Can Be Made With Common Home 3D Printing Equipment. All Parts Can Be Printed Without Support Material On A Makerbot Replicator 2 Or Larger (I Also Use A Type A Machines Series 1), And The Total Material Cost Is Roughly $250. For More Info And Assembly Documentation: Https://Www.Openfabpdx.Com/Fffiddle. Here'S A Video Intro To The F-F-Fiddle: Http://Youtu.Be/8Ndwvcjjs2Y And Here'S The First Tune Played On A Fff 3D Printed Violin! Http://Youtu.Be/_0-8Ezpdshy If You'Ve Built A F-F-Fiddle, Or Plan To Build One, Join The Openfab Violin Builder'S Group To Offer Your Feedback And Get Support During Your Build. Https://Groups.Google.Com/Forum/#!Forum/Of-Fiddles 8/15/14: I Fixed A Problem In The Part Orientation For The Bout And Neck That Caused An Issue With The First Layer. Prints Are Much Easier Now. 7/7/14: I'Ve Made Two F-F-Fiddles In Protopasta'S Carbon Fiber Filament -- They Sound Better! All Of My Bridges Are Now Cfpla, And I Highly Recommend Using Cfpla For Your Parts. See Pictures, Above. 5/6/14: New Bridge Designed To Send Vibration More Directly To The Pickups. New Bout Part Has Counterbore For Gotoh Stealth Guide/Accent Parts. Not Necessary For Functionality But They Look Nice. 4/2/14: Step File For The Instrument Has Been Uploaded. 4/1/14: I Changed The Rev Numbers For The Bout Files To 7. There Is No Change To The Part, So Bout-R6 Is Ok To Use With Neck-R7. You May Use The F-F-Fiddle For Commercial Purposes.
Statistics
Likes
2985
Downloads
0