Lead screw mounting point V2.0 (MPCNC compatible)

Description

Updated !!! This Model Is A Solidworks Redesign / Remix Of Ie_Z_Motor_Mount_10Mm_Longer_25Mm. The Nut Holder Has Two Flavors (When Things Don'T Fit Use The "Edit" One). Previous Model Didn'T Fit On The Mpcnc, So I Added 4Mm To The Backplate Of The Lead Screw Nut Holder. Therefore Also The Motormount Needed An Update. The Lead Screw Needs Two M3 X 30Mm, Four Or Eight M3 X 20Mm. I Added This Extra Nut To Be Able To Get Rid Of Most Of The Slack. The Two M3 X 30Mm Are Put In Place So The Nut Is On The Lead Screw Holder Side. I Used Alan Wrench Bolts, So You Can Tighten Them Under An Angle If You Have The Ones With A Little Ball On One Side. There Are 3 Models To Download: - Z-Motormount - Lead Screw Nut Holder - Filler Plates (The Stl Is 0,3Mm Thick) - M4 Nut Trap For Tool Plate - Tool Plate (Not Available At The Moment) These Filler Plates You Might Want To Design Yourself. (See Picture) The Original Pictures Of The 8M Nut Thingy Is Just For Informational Purpose And Had Something To Do With The Previous Model. This Design Is 100% Perpendicular To The Plane Of The Motor Mount And Work Plane Thingy. Warning !!! The Tool Mount Also Needs A Change, But I Haven'T Designed It Yet. It Will Be A Cool Thingy With Magnets And Bolts To Fix It In Place.

Statistics

Category

Tags