Power Supply 2020 Frame Mount Wilson II
Description
This Is My Solution For Using A Pc Power Supply To Run My Wilson Ii. Can Be Used On Any Printer Using 20 X 20Mm Extrusion Frame. I Used This Guide To Make My Power Supply System: Http://Reprap.Org/Wiki/Choosing_A_Power_Supply_For_Your_Reprap You Will Need 4 Power Supply Screws But The Long Type Aprox 8Mm Long. I Tried The Brackets With 2 Psu'S And One Fitted Perfect And One I Had To Open The Holes On A Few To Line Them Up.
Statistics
Likes
31
Downloads
0