37" Diameter Windmill / Spinner
Description
My Previous Windmill/Spinner Was Nice (Http://Www.Thingiverse.Com/Thing:1536061) But... I Wanted To Print Something Big And Functional On My 8.9" X 5.7" X 5.9" Print Area Printer, So... Here It Is, A 37" Inch Diameter Yard Windmill/Spinner. :) I Drew It Up So That There Is Almost No Support Needed. The Only Part That Requires Support Is The Mount. Printed With Petg, Since It'S My Favorite Stuff. 6 Layers Top, Bottom, And Sides With 20% Infill. You Will Also Need Some Hardware (*I'Ve Included A Pic*) And 3/4" Water Pipe. Everything Is Relative To What You Have As I Designed It To What Hardware I Had On Hand. I Used: 6Pcs Of 4D Finish Nails 6Pcs Of 3Mmx10Mm Nylon Screws 2Pcs 1/4-20X2" Bolts 4Pcs 1/4" Washers 4Pcs 1/4-20 Nuts Glue 3/4" Water Pipe (1.05 Od)
Statistics
Likes
36
Downloads
0