THuGPIG HS1177/Runcam Skyplus mount
Description
I Created A 3D Printable Part To Mount A Hs1177 To The Thugpig Frame (Http://Miniquadfpv.Com/Product/Thugpig/). I Did One For The Runcam Skyplus As Well On Request, If You Loose The Original Carbon Mount Plates For That One You Might Try Out The 3D Printed Mount. I Have Never Tried It Personally, Though, Because I Do Not Own A Skyplus. Feel Free To Print And Use The Model, But I Do Not Consent To Anyone Selling Them In Order To Gain Any Money. Only Personal And No Commercial Use Of My 3D Model. The Gopro Mount On The Pictures Was Created By Deno6031: Http://Www.Thingiverse.Com/Thing:1602212 Changelog: > Major Update (14.10.2016): I Redesigned The Hs1177 Mount. New File: Hs1177_V3. It Should Be A Lot More Durable And Better Looking. In Addition It Has A Minimum Cam Angle Of ~15° Now. A Second Update Limiting Uptilt To Max. 45° Is Planned As Well, But Not Yet Implemented.Pictures Now All Show V3. It Is About 1G Heavier Than V2/V1 When Printed With 10% Infill (Which Is Easily Sufficient) From Abs. > Update (30.07.2016): I Was Told That The Skyplus Mount Was About 1Mm Too Wide. I Uploaded V2 Of The Skyplus Holder Which Is 1Mm Tighter. If The Old One Did Work On Your Printer, Do Not Use The New One. If The Old One Was Too Wide Though, It Should Work Perfectly Now. > Update (16.06.2016): The Hs1177 Model Was A Bit Too Tight, Sometimes It Would Break Apart While Inserting The Cam. I Made It A Bit Wider, Fits Way Better Now For Me. Both Versions Stay Online, New Is Called V2!
Statistics
Likes
8
Downloads
0