Wanhao i3 Thumbwheel alternative
Description
This Is Another Version Of The Thumbwheel To Replace The M3 Wingnut On The Wanhao Duplicator I3 / Cocoon Create / Monoprice Maker Select. It Requires 4X M3 Nuts To Install. The Nut Recesses Are Quite Tight, I Recommend Using Long Nose Pliers To Press Them Into Place. I Also Reccommend Using This In Conjunction With A Locknut Underneath The Heated Aluminium To Stop The M3 Bolt From Spinning. I Prefer The Larger Wings, They Are Easier To Turn Finely Than The More Popular Round Style Knurled Thumbwheels. Edit: Due To Feedback/Comments, I Have Added A Smaller Version Which Should Clear The Printer Frame In Certain Cases Where The Original Size Was Running Into Things, Although I Had No Problems With The Original Size. Edit: For Any Further Changes, You Can Use This Link To Make A Copy And Edit Using Onshape: Https://Cad.Onshape.Com/Documents/Be1F228B579D4336988C6Cb8/W/5A05657C1Cc382Bbebb4Fab8/E/D1A8E55A81200A8Af491Cb3B Edit: As Requested, I Have Added 5.25Mm And 5.75Mm Hex Holes To Allow For Different Types Of M3 Nuts And For Various Printers Undersizing/Oversizing Holes.
Statistics
Likes
202
Downloads
0