WANHAO Duplicator i3 v2 MicroSd to SD card Adaptor Holder
Description
Since I Didn'T Like Using Tiny Micro Sd Memory Cards That Could Fall Into The Cracks Of My Workbench, I Purchased On Amazon.Ca (Asin: B01Cy0Vo3U) An Adapter That Goes From Microsd To Standard Sd Cards. But There Was Still 2 Issues. The First Issue Was To Secure And Locate The Adapter On The Control Box And The Second Issue Was That The Microsd End Cable Of The Adapter Is Really Sticking Out Of The Control Box, Putting It At High Risk Of Breaking It By Accident. So I Decided To Design A Bracket That Would Hold The Adapter While Also Protecting The Fragile Connector. I Made The Design So I Could Snap The Holder Inside 4 Venting Holes, 2 Per Sides. Just Be Careful When You Print It To Orient The Part So Your Slicer Orients The Internal Support In Lengthwise Direction. Otherwise, You Could End Up With Hard To Remove Internal Supports.
Statistics
Likes
23
Downloads
0