Lulzbot Mini Raspberry Pi (Model B) Case

Description

This Case Allows The Mounting Of A Raspberry Pi (Model B) Onto The Side Of A Lulzbot Mini. The Case Is A Remix Of The Raspberry Pi (Model B) Case With 75Mm Vesa Mount By 0110-M-P And The Mounting Bracket From Raspberry Pi 2/B+ Case For Lulzbot Mini By Arijaycomet. I'Ve Included 0110-M-P'S Original Top Stl File Here For Convenience, Though The Bottom Piece Is The Only One That Has Changed. See 0110-M-P'S Original Case For The Source Stp Files. See Photos And Information Bellow For Information On Assembly Hardware And Mounting. The Following Hardware Was Used To Assemble The Case: 2X - Sheet Metal Screw, Phillips Pan Head, #4 X 1/4" Https://Www.Boltdepot.Com/Sheet_Metal_Screws_Phillips_Pan_Head_Stainless_Steel_18-8_4.Aspx?Selected=5435 3X - Sheet Metal Screw, Phillips Pan Head, #4 X 3/4" Https://Www.Boltdepot.Com/Sheet_Metal_Screws_Phillips_Pan_Head_Stainless_Steel_18-8_4.Aspx?Selected=2298 The Following Hardware Was Used To Mount The Case To The Printer: 2X - 18-8 Stainless Steel Button-Head Socket Cap Screw M3 Size, 8 Mm Length, .5 Mm Pitch Http://Www.Mcmaster.Com/?Error_Redirect=True#92095A181/=10N1K9R Warning, Do Not Except 10Mm In Screw Length Or You Risk Clipping The Wiring Harness That Runs Up The Z-Axis To The Extruder. 2X - Type 18-8 Stainless Steel Nylon-Insert Locknut M3X0.5 Thread Size, 5.5Mm Wide, 4Mm High Http://Www.Mcmaster.Com/?Error_Redirect=True#93625A100/=10N1L4I Update (5/22/15): Mounting Bracket Holes Adjusted To Account For The 3 Degree Difference In The 2 Holes On The Printer Frame So The Case Will Now Mount Level With The Printer.

Statistics

Category

Tags