Yet another Wanhao Duplicator i3 - Pen Holder
Description
This A Yet Another Wanhao Duplicator I3 Pen Holder. It'S Designed To Mount To The Extruder Fan Port, And Needs Very Little To Get You Going! Things You'Ll Need: - 3X 3Mm Bolts/Screws - 3X 3Mm Nuts The Drawing Part Is A Little Tricky The First Time Through, But Makes More Sense As You Use It More. The Basic Slicer Settings Are: - Extruder Temp: 0 - Hotbed Temp: 0 - Z Lift On Retract: 5Mm (3Mm And Up Is Good) - Retract Distance = 0.01Mm - Minimum Distance To Retract: 0.1Mm You Then Set The Model To The Z Offset Of Your Paper/Pcb/Card/Etc. And Print It, Watch It Carefully As It Makes The First Line (If Your Zdepth Is Off, You Pen Will Be Mushed Into The Surface; I'M Adding A Springed Design Soon That Will Sort This Issue Out)
Statistics
Likes
21
Downloads
0