Arcade Spinner
Description
These Are 3D Printable Parts That Can Be Used To Make [This Really Nice Arcade Spinner](Http://Www.Digitpress.Com/Library/Techdocs/How_To_Make_A_Spinner.Pdf) Using Mostly 3D Printed Parts. I Replaced The Main 1/4"-20 Screw With A 5/16"-18 Threaded Rod So That I Could Use Leftover Prusa Mendel Parts To Make The Spinner. This Design Uses A Stack Of 5/16" Fender Washers, A ~4" Length Of 5/16"-18 Threaded Rod, Six 5/16"-18 Nuts, Two 5/16" Lock Washers, 4 5/16" Standard Washers, And One 608Zz Skate Bearing. It Also Uses The 6-32 Screws And The Metal Plates Discussed In The Link Above, As Well As The Mouse Parts. With All Of The Leftover Printer Parts I Had Lying Around, And The Fact That I Already Had An Old Mouse I Could Use, This Only Cost Me About $8 To Make. I'Ll Put Up More Detailed Instructions At A Later Date.
Statistics
Likes
52
Downloads
0