DSLR Shoulder Rig (15mm Rail) Remix

Description

This Is The First Of Two Remixes I Did Of Http://Www.Thingiverse.Com/Thing:29677 For A Film Class I Took Last Month. The Other One Is Here: Http://Www.Thingiverse.Com/Thing:1594004 For This One The Changes Are Very, Very Minor. I Just Made The Handles Stack Together A Bit More Neatly And It’S Made For A Camera With A Flip Out Viewfinder So Does Not Need The Offset Pieces. I Also Made Two Sleeves So You Can Use Standard 22.2Mm Bicycle Handlebar Grips. I Was Able To Find The Foam Shoulder Pad On Taobao For About $5 So It Did Not Make Sense To Print That Part. Amazon Seems To Have Similar Pads But For A Bit More Money: Https://Www.Amazon.Com/Dp/B00Enymq8I/Ref=Cm_Sw_Su_Dp Https://Www.Amazon.Com/Dp/B00Enymq8I/Ref=Cm_Sw_Su_Dp As In The Original You’Ll Need 15Mm And 20Mm Aluminum Tubing, The Stuff I Used A Lot Thicker Than I Needed I Think (15Mmod/10Mmid And 20Mmod/12Mmid). The End Plugs Reflect This- But You Don’T Really Need Them. It Just Looks Cleaner. The Thumbwheels Are Here: Http://Www.Thingiverse.Com/Thing:11848 The Link To The Original Model Details The Required Hardware. Parts List: 2 Piece: Dslr_Shoulder_Rig_Handlebar_Adapter 1 Piece: Dslr_Shoulder_Rig_Close_Hand_Grip_A 1 Piece: Dslr_Shoulder_Rig_Close_Hand_Grip_B 2 Piece: Dslr_Shoulder_Rig_Close_Hand_Grip_C 1 Piece: Dslr_Shoulder_Rig_Simple_Rail_Spacer 2 Piece: Dslr_Shoulder_Rig_Std_Clamp 2 Piece: 20Mm_End_Plugs 4 Piece: 15Mm_End_Plug 1 Piece: Camera_Plate_1-4_20 *Or* Camera_Plate_3-8

Statistics

Category

Tags