Shendrones Shrieker Runcam Mount
Description
I Wanted To Take Some Better Video With The Shrieker Because Its So Much Fun To Fly. I Tried A Few Methods Of Fitting An Hd Camera On The Thing And This One Is The Latest. I Uses A Nylon Screw And Nut To Hold The 2 Parts Together. The Previous Version Was Basically The Same But Was Strapped Down With A Velcro Strip (So Just Use The Top Bit). Download Both Files. The Top Part Should Fit In To The Front Hole And Camera Board Mount Hole (I Don'T Use This As Its Only About 15 Deg). The Nylon Nut Goes In The 'Bottom' Part And Should Sit Flush. Screw The Screw In Through The Hole In The Top In To The Bottom Part Until It Clamps On. The Top Shouldn'T Move At All. If It Does You May Need To File Some Of The Plastic Away To Make Everything Sit Flush. Once Installed I Have Added A Strip Of Velcro To The Top Of The Mount And Hold The Camera In Place Using The Velcro And A Battery Strap.
Statistics
Likes
3
Downloads
0