Ugra 132 GPH Water Pump Bracket for Grunblau Platform CNC
Description
These Files Are To Provide Adequate Mounting Brackets For The Grunblau Design Studio Platform Cnc Kit At Http://Www.Grunblau.Com/Platformcnc.Htm These Mounts Are To Wrap Around The Ugra Water Pump 12V 132Gph For Water Cooling System (Ms-500) At Https://Ugracnc.Com/Index.Php/Online-Store/Product/Classic-Stripe-Shirt I Designed This To Mount On The Back Of The Z-Axis 80/20 Aluminum Extrusions, They Attach To The Horizontal Inset Lines Of The Extrusion And Attach Via T-Nuts On The Inside Of The Extrusion. We Used The Same Size Screws For The Large Holes To Attach To The T-Nuts That Were Included In The Kit, But Had To Order More From Mcmaster-Carr. They Are Type 316 Stainless Steel Low Profile Socket Head Cap Screw 5/16"-18 Thread, 1" Long. The Smaller Holes Have A 1/8" Diameter, So Any Screw With A 1/16" Radius Should Work And Have At Least A Length Of 3/4" Length To Fit A Matching Nut On One End To Tighten Up The Front Bracket With The Back Bracket. I Designed This To Be In Two Parts Because Even With Some Variation Of 3D Printers And Warping, The Two Piece Design Allows For A Margin Of Error And The Screws Provide The Tightening Force Around The Water Pump.
Statistics
Likes
19
Downloads
0