Kress trim router base

Description

I Made This Router Base For My Kress 1050-1 Router. It Normally Sits In My Cnc Machine, But It Is Just Too Nice Not To Use For Anything Else. It'S A Very Accuate And Powerful Machine That Fits In One Hand, So With This Base You Can Convert It To A Trim/Palm Router. The Height Is Adjustable With 3 Screws. All Screws In This Desing Are 10Mm M5 Machine Screw And Use M5 Inserts (Search Ebay For "M5 Steel Threaded Flat Insert") There A Two Bottom Half Designs, One Is Completely Round With A Diameter Of 10Cm, The Other Has An Indent Of 1Cm (So Distance Flat Side To Center Is 4 Cm) And Has The Option To Screw On A Accessory. I Included An Accessory Block On Which You Can Easily Screw Or Glue A Flat Piece Of 6Mm Thick Plywood To Use As A Circle Jig. The Base Clamps Onto The Router With A Collarclamp. The Neck Of The Kress Has A Diameter Of 43Mm, So You Can Use It On Other Routers If The Diameter Is The Same. A List Of Routers/Spindels With A 43Mm Neck Diameter: - Kress 530-Fm / 800-Fme / 1050-Fme / 1050-Fme-1 - Kress Fm 6990 E / Kress Fs 6901 E - Aeg Gs 500 E - Aw-Fse 500 / 1050 / 1600 - Bosch Ggs 27C / Ggs 28C / Ggs 28Lc / - Isel Ufm 500 / Ufm 1050 - Makita Gd0600 / Gd0800C - Metabo Fme 737 - Proxxon Bfw 40/E - Suhner Uac 28-F / Uac 25-F / Uac 25-Rf / Uac 30-Rf - Suhner Uad 28-F / Uad 25-Rf / Uad 25-Rf I Printed It In Abs With 3 Solid Outlines And A Infill Of 35%

Statistics

Category

Tags