Maker Farm Prusa I3V Titan Mount
Description
Update: Backcarriage-V2 Has Counter Sunk Holes For The Screws In Order To Avoid Clearance Issues Between The Carriage And The "V" Rails. This Mount Is To Be Used For On Maker Farm Prusa I3V. The Mount Eliminates The X Carriage (Shelf) And Mounts The Motor Directly To The Back Carriage. I Used The "Short" Nema 17 Motor..It Can Be Foundon Amazon: Https://Www.Amazon.Com/Short-Bipolar-Motor-18-4Oz-13Ncm/Dp/B00Pneq79Q/Ref=Sr_1_1?Ie=Utf8&Qid=1465916765&Sr=8-1&Keywords=Nema+17+Short. The Mount Was Created To Be Used With Clough42 7Mm Z Probe Arm And Anthonyq'S Fan Duct The Carriage Can Be Used With Or Without The Servo Mount. Everything Printed At .2 With 30% Infill Abs Or Pet+ Titan Mount And Servo Mount Need Very Little Supports. I Have Printed Several Hours Now With The New Mount And Extruder With No Issues.
Statistics
Likes
25
Downloads
0