Camera slider (motorized)

Description

This Camera Slider Is Used For Dslr Or System Cameras But Also For Action Cams. You Can Use It With Or Without A Motor Driver. Without Motor Driver, You Need: - Square Tubes 15X15 Mm Aluminium (For Round You Have To Make Your Own Parts) (Buy) - 4X Tube Mounts, Bottom (Option With M3 Inserts) And Top With M3 Bolts (Print) The "Loose" One Can Be Tightened With Bolts, The "Tighten" One Can Be Used Without Bolts - Bearingblock (4X), Maybe It Can With 3 Parts (Print) - Bearings Used Are Standard Type 606 (6*17*6 Mm) (Buy) - For Mounting Are Used Bolt M5X20 And M6X20 For The Bearings - Aluminium, Plastic Or Wooden Plate For Mounting The Bearing Blocks (Make) - Camera Bolt To Mount Your Camera, Depending On Camera Type (1/4") (Buy) For Electronic Slider You Need The Following Added: - Belt Mounts To Secure The Belt, Both Parts To Lock Belt (Print) - Belt: Type 2Gt-6 About 2M Length (Buy) - Belt Pulley Mount Slider To Tighten Belt (2 Parts Print) See Also: Nutholder On Mythings For The Wingnuts - 2X Aluminium Pulley Wheels (Buy) - Motor Mount For Belt Pulley, With Or Without Lipo Case (Print) - Motor Type Nema 17 Stepper Motor 42 Motor 17Hs8401 (Buy) - Electronic Box With Speed Control: - Pcb Board With Some Wire (50X70 Mm) - Arduino Nano With Mini Usb - Digital Encoder (Ky-040) - 7-Segment Display (Tm1637 Led Display) - Stepper Driver Board (A3967 Easydriver Stepper Motor Driver) - On/Off Switch (Optional) - 2 End-Switches - Power Source Plug (Female Jack 5.5 Mm) - Arduino Program Will Be Included And Electronic-Schematics - Working: - Encoder Turning Changes Speed (Incrementing Changes According To Abs Numbers) - Encoder Push Button Stops Motor And Changes Direction Motor - End Switches Changes Direction. Be Aware That The Switches Are Standard Low (0 Volt) So You Can Also Leave Them Away. See Also On Instagram @Diyhans If You Have Any Questions, Let Me Know. Https://Www.Youtube.Com/Watch?V=Fygcw06X8I4&Feature=Youtu.Be

Statistics

Category

Tags