Y-Carriage Steel for Hesine M505
Description
First Of All, Fabricate Steel Plate (3Mm), As Shown On Pic#2. Then Drill Holes Using The Original Carriage As A Stencil (You Can Leave A 3 Bearing, But I Recommend 4). Then Print Bearing Gasket (3 Or 4, One For Each Bearing). Gasket Need To Heatbed Not Rested In The Y-Motor. You Can Use Original Belt Attachment Or Print My With Tensioner, But You Need Drill Holes For It.
Statistics
Likes
21
Downloads
0