My Intex Adapter for Pool Connectors - Adapter piece
Description
I Have A Smaller Intex Pool (With 1 1/4" Tubing) And Wanted To Use A Larger Pump (With 1 1/2" Tubing). I Could Have Purchased Something Like This: Https://Www.Amazon.Com/Intex-Adapters-Pumps-Saltwater-System/Dp/B000Rsiczu/ But This Thing Is Most Of What I Wanted: Http://Www.Thingiverse.Com/Thing:446404 I Just Needed To Modify The Smaller End To Fit Over The Smaller Connectors Instead Of Inside The Smaller Tubing. That'S This Thing. I Also Didn'T Have The Extra Threaded Snap-On Connectors That I Needed So I Made Them (See Http://Www.Thingiverse.Com/Thing:1625135). You Will Need An O-Ring. I Used A Brasscraft Sc0542 1 1/4" X 1 7/16" O-Ring I Found At Lowe'S. You Will Also Need A 1 1/4" (Or Slightly Larger) Hose Clamp. I Used One From An Assortment I Got At Harbor Freight.
Statistics
Likes
66
Downloads
0