Smart Extruder + Flex Filament Upgrade
Description
This Is An Upgrade For The Makerbot Smart Extruder +, To Print Easier Flexible Filament. I Made Some First Successful Tests With Flexible Filament Shore 45D On A Makerbot Repicator+ Standard Resolution 0.2Mm. (Pictures Above). I Tested It Even With Ninjaflex (Shore 85A) And It Works. You Have To Adjust Z-Axis Offset, Print Speed (Shell And Infill Print Speed 20Mm/S), Temperature And Retraction (Temperature 235°C, Filament Diameter 1.77, Retraction Distance 0Mm). Here'S A Blog Post To This Topic: Https://Www.3D-Edu.Ch/Makerbot-Print-Update-Fuer-Custom-Settings-Flexibles-Filament-Mit-Replicator-Drucken/ It Works Even Better With A Makerbot Tough Pla Smart Extruder! Filaflex Says: - Print Speed 20Mm/S - Print Temperature (240 °C) - None Retractions Or Low Distance (1Mm Retraction Distance And 30Mm/S Speed) - Increase The Extruder Flow If Your Plastic Melt Flow Is Not Constant.(105-115%) Take Care: If You'Re Doing Some Changes On Your Products You May Loose Warranty!!
Statistics
Likes
32
Downloads
0