Resettable handwheels for mini lathe
Description
Resettable Handwheels Made For The Mj-189 Mini Lathe (Emco Unimat 4 Clone) . Source Included For Customization. Two Different Handlebar Sizes. 60Mm And 40Mm Handle-To-Handle Distance. I Recommend Using The Larger One When Possible Sine It Gives Smoother Motion, But It Might Be In The Way If/When Using A Compound Slide. Suggested Hardware; 2X M5 Nuts (To Lock The Handwheel To The Threaded Rod On The Lathe) 2X M4X20Mm Socket Cap Screws For The Handles 1X Washer Suitable For M5 Hardware (To Lessen The Wear/Friction On The Hand Wheel) 2X Small 2.5-3X10Mm Wood Screws For Mouting The Handle Bar To The Base (The Tension Of These Also Control The Friction Of The Scale Ring). For Notes On Customization And Making The Scale Strip. See Readme_At.Txt
Statistics
Likes
64
Downloads
0