E3Dv6 Bowden X-carriage mount v2 for Prusa i3
Description
**This Is 'Version 2' Of The Popular E3Dv6 Bowden X-Carriage Mount For Prusa I3.** Https://Youtu.Be/Btmdortwbny If You Have A Prusa I3 And Are Upgrading Your Hotend To An E3Dv6 (Lite And Clone Compatible) With Bowden, Then You'Ll Need This Hotend Mount For Your X-Carriage. As This Design Clamps The Hotend To The Mount, There'S No Chance Of A Wobbly Hotend. Cooling Has Been Incorporated Into This Version, Rather Than A Bolt-On After Thought. This Updated Design Removes The Clutter Around The Hotend So You Can View The Printing Unobstructed. A 50Mm Radial/Blower Fan Is Utilized To Provide Ample Cooling For Your Prints Resulting In Sharp And Detailed Finishes. * [50Mm Blower Fan](Http://Www.Banggood.Com/3D-Printer-12V-Dc-50Mm-Blow-Radial-Cooling-Fan-P-980653.Html?P=9X051049165582016063) * [Genuine E3Dv6](Http://Amzn.To/2Qds6Kv) Or [E3Dv6 Clone (1.75Mm Long)](Https://Www.Banggood.Com/0_4Mm-All-Metal-3D-Printer-Extrusion-Head-Nozzle-With-Fan-P-1036420.Html?P=9X051049165582016063) 3 Parts - The Mount, Clamp And Duct. To Clamp The E3D Hotend, You'Ll Need 2 X M4 Screws With 20Mm Length And 2 X M4 Nuts. For The Duct, You'Ll Need 2 X M3 Screws With 6Mm To 10Mm Length For The Blower Fan, You'Ll Need 1 X M3 Screw With 25Mm Length And 1 X M3 Nut. *Note: If Your X-Axis End-Stop Is On The Right Hand Side, You'Ll Lose Approximately 10Mm On The X-Axis Because The Blower Fan Is Quite Long.* **Inductive Sensor Option - Check The Remixes Section :)** Duct V1.1 Added To Support E3D V6 Block With Silicone Sock. Enjoy This Design? Consider Supporting Me On Patreon: Https://Www.Patreon.Com/Tech2C
Statistics
Likes
3035
Downloads
0