ZProbe Sensor Platform for Rostock
Description
This Was Supposed To Be A Z Probe Sensor Mounted Directly On The Platform, Before You Add Your Hot End, In Order To Calibrate Your Delta X, Y And Z Offset And Also Radius. You Need: * Some Switches Between 3-6 Is Up To You. You Can Find On Banggood Some Small Switches [Here](Http://Www.Banggood.Com/100Pcs-Mini-Micro-Momentary-Tactile-Tact-Switch-Push-Button-Dip-P4-P-917570.Html?P=2L17062217407201508V) Or Long Switches [Here](Http://Www.Banggood.Com/100Pcs-Tactile-Push-Button-Switch-Tact-Switch-6X6X10Mm-4-Pin-Dip-P-1000844.Html?P=2L17062217407201508V) * Some Soldering Equipment And Skill * And A Printer Of Course To Print This. All The Switches Will Be Connected In Parallel So When Anyone Is Pressed, The Zprobe Is Triggered. Note: Didn'T Finish The Setup Yet Will Update With Picture And Video When Ready.
Statistics
Likes
5
Downloads
0