Bracket + Z-EndStop + Oil Drip Tray + Oldham Coupler for TEVO Tarantula
Description
Remark: I'Ve Already Made An Easier And Better Versions Of This, Which Maybe Will Be Better For You. Please Check It Before You Print This: Https://Www.Thingiverse.Com/Thing:2975772 This Is A Modular Mix Of Following Things: 1) My 'Z-Endstop' (Http://Www.Thingiverse.Com/Thing:1443439) 2) My 'Oil Drip Tray' (Http://Www.Thingiverse.Com/Thing:1525464) You Need To Put A Pet-Cap Into The Hole. 3) The 'Tevo Tarantula Brackets' By Thingirob (Http://Www.Thingiverse.Com/Thing:1457449/#Files) 4) The 'Tarantula Oldham Coupler V4B1' By Doron Shalev (Under Tarantula Facebook Page 'Files' Section). Now You Can Use The 4 Models At Once, Or A Combination Of Them! (Off Course All Credits Go To 'Rob Cad' For Designing The Brackets And & 'Doron Shalev' For The Oldham Coupler (V4B1)!) You Can Print The Bracket With Or Without The 'Oil Drip Tray', And With Or Without The Z-Endstop Button Holder (All Different Models Available). Also You Can Print A Totally Separate Z-Endstop Button Holder, For Those Who Don'T Need/Want To Use The Bracket. Make Sure You Use/Print The Motor Bracket You Find Here, And Not Rob Cad'S Version, Otherwise Your Z-Rod Won'T Be Aligned With The Oldham Coupler And Oil Drip! You Can Use The Screws And Nuts Delivered With The Printer. Parts You Need 'Extra': 1X Pet-Cap (To Put Into The Oil Drip Hole) 1X M5 Nut (For The Lower Hole Of The Z-Endstop) 1X M5 Nylon Nut (For The Upper Hole Of The Z-Endstop) 1X M5 50Mm Bolt (With Hexagon Head) Have Fun! And Please Add Pictures When You Made One!
Statistics
Likes
128
Downloads
0