Ambient Weather Wind Spinner Repacement
Description
This Is A Replacement Wind Spinner For Ambient Weather Radio Controlled Weather Station. You Will Need To 3D Print One Spinner With Support And Three Cups Without Support. Drill Or Ream Out The Bearing And Magnet Hole To Fit. Pull Out The Old Magnet With Pliers And Insert In New Spinner. Push The Cup Shafts Into The Spinner And Glue In Place With Common Model Glue. Be Sure The Spinner Fits And Spins Freely So You Can Get An Accurate Reading. To Help With The Arizona Sun I Painted Mine White With Spray Paint. This Spinner Fits On A 10Mm Bearing And A 4Mm Magnet.
Statistics
Likes
99
Downloads
0