Centrifugal Water Pump
Description
The Idea For This Project Was To Be Used As A Pump For Cooling Liquid On A Lathe. Using Ideas From Other Similar Designs, I Created A New More Efficient Water Pump. All Printed And Tested In Pla With A Printed Rubber Seal. Motor I Designed This Around Was 28Mm In Diameter And The Shaft Was 2.2Mm. The Water Is Output Through A 5Mm Hose Adapter (Fish Tank Bubble Tube). I Was Able To Tap The 4Mm Holes So I Could Screw Straight Into The Plastic With M4 Bolts
Statistics
Likes
381
Downloads
0