USB Organizer
Description
Parametric Usb Organizer With Screw Holes (On The Back) To Mount It On A Wall. There Are Many Models For Usb Holders/Organizers In Thingiverse But All I Cound Find Were In One Row So I Made A Model With Openscad And Decided To Share It Here. This Model Is Suitable For Wall Mounting. This Model Is A Customizable Model, You Can Use Thingiverse Customizer To Customize. Body: * Number Of Rows * Number Of Columns * Spacing Between The Holes * Corner Radius Screw Holes (On The Back) * Diameter Of The Screw Head * Diameter Of The Screw Shank/Threat * Height Of The Screw Head * Tolerance Of The Screw Head Hole. Connector * Size Of The Connector (The Defaults Are For Usb A) * Tolerance Of The Connector Hole Which You Can Tweak So The Holes Aren'T Too Tight. <Br> <B>I Have Used 0.3Mm Which Gives A Snug Fit. <Br>Please Note - If Your Printer Is Not Calibrated You Should Use Something Like 0.5. <Br>The Tolerance Can Also Be Filament Brand/Type Dependent Due To Shrinkage. So Test It With A Small Piece Before You Print A Large One.</B>
Statistics
Likes
248
Downloads
0