Kossel Layer Fan Duct and Mount E3D
Description
Layer / Part Fan Mount And Duct For Your Ultibots K250 Bse (And Likely Other Derivatives). I Couldnt Find A Fan Duct And Mount Solution That Worked For Me. Common Issues Were: Restricted Xy Travel Limits, Poor Performance, Or Just Plain Flimsy. Whats An Engineer Do In That Situation? He Designs His Own. Mine Is By No Means Perfect. I Know There Are Issues With The Angles But If Printed In Pc It Wont Get Soft And Will Stay Rigid. Designed For A Standard 5015 Centrifugal Fan To Mount To The Ultibots Mag Ball Efector. I Recommend Printing In Polycarbonate For The Temperature Resistance. If You Print In Something Else Put Some Kapton Between Heater Block And Duct For Insulation. I Uploaded The Native Creo .Prt So Feel Free To Modify To Your Needs. I Also Included A Step And Stl. Walls On The Duct (K250_Annularfan & K250_Annularfan_Cs1.Stl) Are 0.5Mm Thick, Print With A 0.5Mm Nozzle. I Suggest Keeping Those Equal To Ensure You Get A Good Single Wall So Modify Cad To Your Nozzle Size Or Get A 0.5Mm Nozzle. I Do Not Plan To Make Any Updates At This Time. 07/04/16 Update: Found Issue With "5015_Franbracket_Final.Stl", Deleted Old One And Uploaded New Unbroken Faceted Model.
Statistics
Likes
20
Downloads
0