Micro FPV Quadcopter 125 | 8.5mm motors and Micro Scisky

Micro FPV Quadcopter 125 | 8.5mm motors and Micro Scisky

Description

This Quadcopter Frame Was Inspired By The [Micro 105 Fpv Quadcopter - 8.5Mm Motors, Micro Scisky](Http://Www.Thingiverse.Com/Thing:1221911) And The [Scisky Fc (Quanum Pico) In Parrot Frame](Http://Www.Thingiverse.Com/Thing:1361966), But Modelled From Scratch. If You Need Detailled Instructions On How To Build Such A Mini Quadcopter Beast, I Suggest You Read [Punkkills Instructions](Http://Www.Thingiverse.Com/Thing:1221911). ### Important: Use The "_1.6Mm" Stl-Files, If You Know Your Printer Has Troubles With Inprint Between 1.2 And 1.5 Mm Layer Width! Otherwise, The Motor Mounts Might Not Be As Stable As Designed. Changes: + Wall Width Increased From 1.5 To 1.6 Mm On Motor Mounts And Sides Of Inner Frame. ### Stats: + **Lightweight**: 8 G Bottom, 2 G Top. My Complete Setup (See Pictures) Weighs 43 G. With 750 Mah Battery It Gets To 63 G And ~10 Min Flight Time. 950 Mah Is Also An Option To Prolong Flight Time To ~12 Min, But You Will Feel That The Quadcopter Gets A Bit Less Responsive. + **Robust**: This Frame Already Survived Hard Impacts. In Fact I Was Not Able To Destroy One Yet :) + **Motor Mounts**: I Desinged To Motor Mounts To Be Very Robust, So The Motors Take No Damage During Crashes Or Harsh Landings. + **Micro-Scisky Mount**: This Frame Has A Built In Mount For Your Micro-Scisky Board To Hold It Straight In Place! + **Easy Usb Access**: Rear Notch To Easily Plug In Your Usb Cable For Programming. ###My Setup/What You Need: + **4X 8.5 Mm Motors + Propellers**, E.G. Hubsan 107**C** Parts + **Micro-Scisky/Quanum Pico Flight Controller** (+ Dsm2 Compatible Radio) + **1S Lipo**, > 300Mah + **4X M3 Screw**, Shaft Lenght > 18 Mm **Optional:** + [Mini-Camera](Http://Www.Banggood.Com/600Tvl-8_0Mp-14-2_8Mm-Cmos-Fpv-170-Degree-Wide-Anlge-Lens-Camera-Palntsc-P-984345.Html) + **5.8 Ghz Video Transmitter**, E.G. **Fx Mm213Tl** Or **Tx5813** + **5.8 Ghz Antenna** + **5.8 Ghz Receiver Equipment** + **Foam Rubber**, For Bottom Of Quadcopter And Camera (See Pictures) In Case Of Hard Crashes

Statistics

Likes

65

Downloads

0

Category

R/C Vehicles