Raspberry Pi 7 inch Touch Screen Stand
Description
This Is A Simple Stand For The Official Raspberry Pi Touchscreen Screen. Create For The #Piiot Design Challenge On Element14.Com, To Follow The Progress Check Out Https://Www.Element14.Com/Community/Community/Design-Challenges/Pi-Iot?Icid=Hp-Latest-Dchnews#Challenger To Attach The Legs Of The Stand To The Pi Display You Will Need 4-40X3/8 Screws That You Can Get At Your Local Hardware Store. To Solve The Upside-Down Issue You Need To Add The Following Line To The Config.Txt File, If You Have A Wireless Keyboard Connected Open The Terminal And Run The Following Command Sudo Nano /Boot/Config.Txt And Then Add The Following Line To The File Lcd_Rotate=2
Statistics
Likes
13
Downloads
0