Clothes Hanger Peg for washing line
Description
Clothes Hanger Pegs For Washing Lines That Should Not Slip On The Line Or Blow Off In The Wind. I Made Them For Use With Either An 8Mm Diameter Plastic Coat Hanger And A 4Mm Metal Coat Hanger And A 8Mm Square Hole - Skirt/Trouser Clothes Hangers. Made Using Abs 1.75Mm Infill Density Low 10% (Needs To Be Flexible) Layer Height 0.2 Supports, Raft - Not Required. I'M Sure The Design Could Be Improved.
Statistics
Likes
14
Downloads
0