P-X FPV RACING DRONE
Description
P-X (Per X) Fpv Racing Drone This Is My Racing Drone That I´M Currently Using In Swedish Drone Cup. It´S A 220Mm X-Frame Designed For 5" Props With Four Standard 3 Or 4Mm Qav280 Arms.The Purpose Of This Design Is A Fast And Cheap (About 15 Usd) Racing Frame. I´Ve Been Printing In Pla And This Latest Version Has Survived Arm-Breaking Crashes And Is Still Flying! Tow (Take-Off Weight) With A 3S 1300Mah Battery Is About 500Grams. Needed Parts For A Complete Build (From Top To Bottom): §1 - Camera Mount (1 Pc) Designed For A Hs1177 (12Mm Lens Diameter) And Secured With Two Tiewraps For Easy Replacement. 50 Or 60 Degree Camera Angle Designs Available. §2 - Top (1 Pc) Installed With Four M3 Bolts. Washers Recommended. Access-Holes To Change Channels On Vtx. §3 - Standoffs 37Mm (4 Pc) With Inner M3 Threads In Both Ends. §4 - Antenna Mount (1 Pc) Installed Over The Rear Standoffs. §5 - Base (1 Pc) Standard 30,5Mm Hole Pattern For Pdb And Fc. Use Small Standoffs To Be Able To Insert The Battery Strap Between The Base And The Pdb. §6 - Qav280 Arms (4 Pc) Standard Qav280 Arms. Se Picture For Measurement Reference In Mm. §7 - Lwr (1 Pc) Lower Plate To Secure The Arms. Two Designs Available For 3 Och 4Mm Thick Arms. §8 - M3X16Mm Screw (16 Pc) Use For Pdb/Fc Stack, Standoffs And Thru Lwr, Arms And Base To Secure The Arms. §9 - M3 Self Locking Nut (8 Pc) Use For Arm-Bolts. Washers Recommended. §10 - Battery Distance Just A Distance To Make Sure The Bolts Do Not Damage The Battery. §11 - Battery Strap Insert The Strap Underneath The Pdb, To Secure The Battery Underneath The Frame. Building Guide: Build From Bottom To Top. Look At The Pictures Of My Quad For Reference. Happy Flying! /Per
Statistics
Likes
78
Downloads
0