Folger Tech Cloner Adjustable Z Endstop Mount
Description
Simple Yet Useful Z Endstop Mount Design. Other Than The Two Parts, You Need An M3X At Least 30Mm Screw (I Recommend 45 Or 50Mm), An M3 Lock Nut, And Two M3X10 Screws. You Will Have To Drill Into The Frame Like You See In The Pics. You Must Use That Small Black Endstop Backer Piece As Well To Get The Spacing Right. Once You Insert The Tabs Through The Endstop, Use A Flathead Screwdriver To Widen Out The Tabs To Secure It In Place. The Long M3 Screw Goes Through The Top Piece, And Threads Into The Bottom. Since The Top Piece Is Secured To The Frame And The The Bottom Is Threaded To The Screw, Turning The Screw Moves The Endstop Up And Down, Allowing For Very Minute Adjustment. Much Better Than The Stock Design. Flip The Top Part So It Is Flat Side Down. (Doesnt Matter Much Which Flat Side It Is)
Statistics
Likes
0
Downloads
0