18mm Inductive Sensor Rear Mount
Description
Use For Mounting Your Inductive Z-Height Sensor Behind Mak-A-Face'S 3 Or 4 Bearing X-Carriage For The Following Prusa I3 Re-Work Style X-Carriages: Http://Www.Thingiverse.Com/Thing:886421 Http://Www.Thingiverse.Com/Thing:643799 This Locates You Inductive Sensor Behind The X-Carriage And Out Of The Way Which Is Very Nice And Clean. It Also Helps Balance The Mass Of The Hot-End So That The Cg Of The Carriage Is More Aligned With The Belts. Unfortunately This Does Limit Your Z-Height On Prusa I3 So Look Elsewhere For An Inductive Sensor Mounted On The Front Side Of The X-Carriage If That Is Important To You. For This Design The Sensor Is Clamped In The Bracket, You No Longer Need The Nuts To Lock It In - But I Like To Position The Nuts On The Top Of The Bracket With Them Jammed Together As A Method Of Maintaining The Vertical Location Of The Sensor If You Need To Dis-Assemble The X-Carriage And Do Not Want To Lose Fine-Tuning Of The Z-Stop Height.
Statistics
Likes
34
Downloads
0